Hardware Installation - Genius MaxFire MiniPad V2 Manual Del Usuario

M a x i F e r
Buttons 5~6
8- Way
A.
Software Installation (for MaxFire MiniPad Pro only)
- Install the software first before you install the MiniPad.
- If you don't want to install the driver, the MiniPad Pro will work without the vibration function.
1. Insert the MiniPad Pro driver CD into your CD-ROM; wait for a few seconds for your PC to load the disc.
2. If your system is setup to automatically read a new CD, then the auto run program is executed and the opening
installation screen appears. Please follow the on-screen instructions.
3. If your system doesn't launch the installation software automatically, locate the auto execute file "Install bat",
under the directory of your CD drive and click on it, then follow the on-screen instruction to install the MiniPad
Pro software.
4. The installation procedure is as follows:
Install Shield Wizard information: The system is ready to install, click "Next".
Copyright information: Select "Agree" and click "Next".
User information: Key in "User's name and Company". For Windows 2000/XP, select an appropriate use
limit.
Press "Install", then click on "Finish".
5. Upon completing the software installation, restart your PC.
B.

Hardware Installation

1.
Plug-in your game pad connector to either a USB Port or USB Hub of your computer.
2.
After connection, the "Find a new hardware" message appears and the standard USB driver will be located for
you to finish the easy installation and play games immediately.
3.
If the game pad is properly plugged to your PC but does not work with your game, go to the Game Controllers
page and select "Advanced " page to check whether the USB, 2-axis 8-button game pad ID is "Joystick 1" or
not. Note: When there is only one game controller connected to your PC, this game pad must be "Joystick 1" so
it works properly.
4.
Turbo & Clear Functions:
-To set an action button in turbo mode: Press and hold the TURBO button. Press and release any action buttons
you want to put into Turbo mode. Release the TURBO button.
-To clear the turbo function from an action button: Press and hold the TURBO button. Press and release any
action buttons you wish to clear. The action buttons you pressed will now return to their original function.
C.
Importance & Attention
1. Make sure your software supports the Game Controller/Joystick.
2. Not every game requires all functioning buttons. If you find some buttons do not work inside the game, please
check the game settings again.
3. The function of the game pad buttons may vary in different games. Before proceeding to game settings from
the OPTION inside the game, always read your game's manual carefully to set the best game settings.
M n i P i a d V 2
Buttons 1~4
Turbo/Clear
M a x i F e r
Buttons 5~8
Turbo/Clear
8- Way
Analog Mini Stick
1
ENGLISH
M n i P i a d P o r
Buttons 1~4