Adjustment Of Spring Tension; Repair Instructions; Spare Parts - Desoutter HROL 3/4 RUBBER 15M BSP Manual Del Usuario

English

Adjustment of spring tension

E
See page 6.
Risk of personal injury!
Use protection gloves.
● Recoil the hose until the hose stop stops
against the outlet.
● Pull the hose out, to a position where the
ratchet is engaged.
● Unscrew hose stop and tool connected to the
hose.
● Turn the drum, with all hose wound on: one
revolution in the direction of the black arrow
when increasing the spring tension, one
revolution in the direction of the blue arrow
when decreasing the spring tension.
● Beat hose stop and tool.
● Check that the required length of hose can
be pulled out without stretching the spring to
its limit.
Maintenance instruction
F
See page 6.
Is recommended regularly or at least once a year.
1. Check the spring function by testing if the
hose recoils properly.
2. Check that swivel and hose couplings don't
leak. Change the seal if required. Clean the
swivel and couplings.
3. Check that the hose is intact. Clean the hose
if oily or dirty.
4. Check the ratchet mechanism.
5. Check the mounting of the reel on wall or
ceiling.
When disposing of components,
lubricants, etc ... ensure that the
relevant safety procedures are carried
out.
01/2015

Repair instructions

G
See page 7.
WARNING!
Risk of personal injury!
Before starting any operation in the reel:
1. Turn off the supply of air.
2. Engage the safety catch before
changing the hose or swivel.
3. Before starting other operations,
release the spring tension by
removing the hose stop and allow the
hose to recoil completely.
Instructions for hose fitting, see "D".
Instructions for changing the swivel
comes with each spare part.
Accessories
H
See page 7.

Spare parts

I
See page 8.
When ordering parts always state:
● Part no. and control no.
(From the identification label of the reel).
● Detail no. of the spare part and the name.
● Quantity of the parts required.
11 / 76
6159942020_03
Series: A