Brizo 63005 Serie Manual Del Usuario página 6

3
A
Supply Line Connections
CAUTION: Extreme care must be
exercised in bending copper inlet
tubes to avoid kinking. Follow these
instructions exactly. Kinked tubes will void
the warranty.
Gently push tubes (1) to the back of the
mounting bracket (2). Spread the tubes to
desired position by grabbing near the top
2
1
B
6
1
1/2" (12.70mm) IPS
of the tubes. Make connections to water
lines. Use 1/2" IPS faucet connections
(A) (not provided), or use coupling nuts
with 3/8" O.D. ball-nose risers (B).
Important: Use two wrenches when
tightening. Do not overtighten.