Basic Operation; Standby/On; Automatic Power Off Function; Select Modes - Hisense HS218 Manual De Usuario

2 Then press on the unit or remote control to
switch the unit ON.
3 The Pair indicator on the subwoofer will
become solid when successful.
4 If the Pair indicator still keeps blinking, repeat
step 1-3.
NOTE:
• The subwoofer should be within 6 m of the
soundbar in an open area (the closer the
better).
• Remove any objects between the subwoofer
and the soundbar.
• If the wireless connection fails again, check
if there is a conflict or strong interference
(e. g. interference from an electronic device)
around the location. Remove these conflicts
or strong interferences and repeat the above
procedures.
• If the main unit is not connected with the
subwoofer and it is in ON mode, the unit's
POWER indicator will flash.

Basic Operation

Standby/ON

When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the button on the unit or on the
remote control to switch the unit ON.
• Press the button again to switch the unit
back to STANDBY mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
Auto Wake
• If a TV or an external device is connected (LINE
IN / OPTICAL / COAXIAL / HDMI ARC), the unit
will switch on automatically when the TV or
the external device is switched on.

Automatic Power Off Function

The unit automatically turns to Standby mode
after about 15 minutes if the TV or the external
unit is disconnected, switched off.
• To switch the unit off completely, remove the
mains plug from the mains socket.
• Please turn the unit off completely to save
energy when not in use.

Select Modes

Press the (SOURCE) button repeatedly on
the unit or the SOURCE buttons on the remote
control to select the LINE IN , OPTICAL, COAXIAL,
HDMI ARC, USB and BT (Bluetooth) mode.
The selected mode will show on the display.

Adjust the Bass/Treble Level

Press TREBLE then press VOL+/- button to
•
increase or decrease the treble.
(treble+5 / treble–5)
• Press BASS then press VOL+/- button to
increase or decrease the bass.
(bass+5 / bass–5)
• After about 5 seconds, the unit will exit from
bass/treble setting. The display will show the
current selected mode. You may now press the
VOL+ / - buttons to adjust volume.

Turn the Surround Sound ON/OFF

Press the SURR button on the remote control
•
to turn on the surround sound. Press this
button again to turn off the surround sound.

Adjust the Volume

- Press the VOL+ / VOL- buttons on the unit or
on the remote control to adjust the volume.
- If you wish to turn the sound off, press the
(MUTE) button on the remote control. Press
the (MUTE) button again or press the VOL+ /
VOL- buttons to resume normal listening.

Adjust the Brightness

- Press the DIMMER +/- buttons on the remote
control to select brightness level.

Select a Preset Sound Effect

While playing, press the EQ button on the
•
remote control to select desired preset
equalizers: MOVIE, MUSIC, NEWS.
11