Technical Data; Special Safety Instructions - Probuilder 33043 Manual De Instrucciones

MIXER
Introduction
To get the most out of your new mixer, please
read through these instructions before use.
Please also save the instructions in case you
need to refer to them at a later date.
Use
This powerful mixer is ideal for mixing and
combining all types of material ranging from
paint to cement. The strong handles ensure a
comfortable and safe working position.

Technical data

Voltage/frequency:
Power rating:
Gears:
Speed:
Socket:
With 300 cm rubber cord and two-part
Ø140×570 mm mortar mixer paddle
Sound pressure, L : 85.4 dB(A), K
pA
Sound level, L : Sound level, L Sound level, L
WA WA
Vibration:
The table below shows how long you
may be exposed to vibration every day, if
the vibration load of 2.5 m/s
exceeded:
24
230 V~ 50 Hz
1200 W
240-500/380-850 rpm
M14
: 3 dB(A)
pA
96.4 dB(A), K : 3 dB(A)
WA
2.272 m/s , K: 1.5 m/s
2
is not to be
2
Vibration
2.5 m/s
2
3.5 m/s
2
5 m/s
2
7 m/s
2
10 m/s
2

Special safety instructions

Do not use the mixer to mix or agitate
materials with an ignition point below 21 °C.
Never turn the mixer on unless the stirrer
attachment � tted is immersed in the
material to be mixed/agitated. Check that
the container holding the material is � rmly
positioned on a solid, even surface.
2
Never put your hands, other body parts or
other objects in the container holding the
material while the mixer is running.
Do not cover the mixer's ventilation holes.
Do not use the gear selector while the mixer
is running.
The mixer is not suitable for permanent
installation.
2
Max. exposure
8 hours
4 hours
2 hours
1 hour
30 minutes