Technical Specifications - Buffalo DC900 Manual De Instrucciones

UK
Troubleshooting
Fault
Appliance not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Appliance does Faulty thermostat
not reach set
Faulty element
temperature
Appliance heats up Indicator light has expired
but indicator light
does not come on
Power indicator Faulty element
light comes on but
Faulty thermostat
appliance does not
heat up Thermostat set incorrectly
Appliance slow to Cooking surface not clean
heat up
Faulty element
No power Thermal cut-out switch is
activated
Surface flaking Build up of carbonised food
debris

Technical Specifications

Model Voltage
DC900
230V, 50Hz
DC901
6
DC900_DC901_ML_A5_v2 20200403.indb 6
Probable Cause
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Check thermostat
Clean cooking surface as instructed
Call BUFFALO agent or qualified technician
Press re-set switch on rear of unit
Refer to "Cleaning, Care and Maintenance"
section
Cooking Surface
Power Current Dimensions
W x D (mm)
1800W 8A
2800W 12.2A
Solution
Dimensions
H x W x D mm
385 x 280 228 x 440 x 365
380 x 385 228 x 440 x 460
Weight
18.1kg
23.7kg
2020/4/3 11:54