Emist EPIX360 TruElectrostatic Manual Del Usuario página 9

ASSEMBLY & OPERATING INSTRUCTIONS
Tip: When a new liner is first installed it requires air to be blown into
it for the liner to fully expand. By doing this the liner becomes fully
inflated for all of fluid to fill the tank.
CAUTION: If a tank liner is not used, liquid will leak from the small
holes in the bottom of the tank.
These holes allow for air to escape through the tank itself to collapse
the liner. Collapsing the liner is what makes the system capable of
using all liquid solutions and provide all directional spraying.
Warning: Do not plug the hole in the bottom of the tank to keep from
using the tank liner. This is considered a modification to the product and
will void the warranty if done. There is high potential for burning up the
pump if this is done.
y Once this is completed, pour the diluted or ready to use solution into the
tank.
Step 5: Installing the Tank Cap and Cover:
y To install the tank cap, gently turn clockwise against the threads until the
cap no longer turns.
y Each tank cap has a stopper along the tank that prevents overturning.
y To install the tank cap cover, simply line the opening of the cover with
the nose of the tank cap.
Step 6: Installing the Liquid Tank:
y To install the tank onto the sprayer, align the tank nozzle to the port on
the body of the sprayer and gently press in until you hear a click. This
is the tank lock locking into place along with the tank back clip. This is
what holds the overall tank in place.
Step 7: Depress the Trigger Button to Begin Spraying:
y Once the system has been filled with liquid solution, you can begin
spraying.
y Depress the trigger button located on the front of the sprayer handle.
Hold it down for the entire spray time required for surface treatment.
y The red indicator light at the back of the system indicates power on
and the high voltage power supply is charging the liquid droplets and
recognizes power to the system.
Tip: When first starting to spray, the system needs to be primed with liquid,
hold down the trigger button for 10 to 15 seconds or until the sprayer
produces the mist. This needs to be done every time a tank is refilled or the
liner has been replaced.
Copyright ©2021 SanoTech 360, LLC. All rights reserved. All product names, logos, and brands are property of their
respective owners. Prices are in U.S. Dollars. Prices are subject to change. All use of the website and resources is
subject to the Terms of Use. EMI-018-21 Multilingual Manuals - 052721
EN
9