Adata Elite CE700 Guia Del Usuario página 4

ii. Step B: With the Qi logo facing the front, insert the upper cover
into the rubber insert with the rubber mat on the same side as
the logo.
B. Depending the phone's orientation, size, and induction zone
position, adjust the upper and lower covers to the most
appropriate location.
C. Confirm that the metal cover plate is in flat contact with the
charging cover and that the bases are level, in order to maintain
the charging stand stability.
D. Connect the CE700 to the USB cable, and connect to the power
supply (for details, see section 3.A).
E. Place the phone's induction zone (Rx) on the induction zone (Tx)
of the CE700 (For Tx/Rx alignment, see section 3.B). If the phone
is larger than 5.5 inches, it is suggested to place the phone
horizontally when using upright charging mode, in order to
maintain alignment and stability.
P3
5. Specifications
No. Item
1 Input power
2 Output power
3 Operating temperature
4 Dimensions
5 Weight
6. Precautions
A. When charging, do not place any metal objects (such as coins) on
or near the charging stand.
B. Do not charge phones that have metal-containing cases or housing.
C. Excessively thick phone cases are likely to negatively affect the
charging performance.
D. Do not use the CE700 with an extension cord.
E. Do not drop or apply heavy weight to the CE700.
F. Do not disassemble or attempt to repair the CE700 wireless
charging stand.
G. Do not twist or squeeze the enclosed USB cable. If you need to
replace the USB cable, make sure that the product meets these
recommendations: (AWG # 22 for power / # 28 for data).
H. In order to avoid electrical shock and fire hazards, do not operate
power charger with wet hands.
I. Do not place the CE700 in a damp or wet location.
J. Unplug the CE700 when it is not in use for a long period of time.
K. When using the CE700, keep it away from hot appliances
(Ex: stoves, microwaves, etc.)
L. Do not use the CE700 near high-pressure containers.
For more information, please visit the ADATA website
www.adata-group.com
Specification
DC 5V / 1.5A
DC 5V / 1.0A
0℃~45℃
139.7mm x 74.7mm x 11.8mm
120g
P4