Cleaning Instructions - Artemis A-2001 Manual De Instrucciones

5. OPERATING INSTRUCTIONS
Before using the appliance for the
first time, clean it carefully according
to those specified in Chapter 6.
To start using the appliance, follow
the below mentioned steps:
1. Plug the appliance in the socket.
Make sure the line proving the
socket with current is protected
by a cut-out relay, according
to the applicable legislation.
2. Add the product you wish to
process, in the container
3. Add the container on its initial place
4. Press the operation
switch to place I
5. Press the operation switch to
place II, should you wish to
speed up mixing procedure.
Note! Do not fill the container
up, to avoid overflowing
during food processing.
6. CLEANING INSTRUCTIONS
Cleaning Point
Axis & mixing
propellers
Container
External parts of
the appliance
8
Cleaning
When How
Clean using
hot water with
After detergent/
any use cleaner. Rinse
with clean
water and dry
After
work, on Clean with hot
a daily water and dry
basis
Note! When starting to mix, it is
recommended that you switch
the appliance on at position I
(low speed) and then pass to
high speed (position II).
Attention! Magnetic field is developed
around the appliance. If you use
cardiac pacemaker and in case you
fell uncomfortably, stay away from the
appliance and consult your physician.
In case of damage or malfunction
of the appliance, please
follow the below steps:
1. Turn the ΟΝ-OFF switch
to position ''0''.
2. Remove the cable from the socket
3. Call authorised technical staff
certified by the manufacturer
or contact any manufacturer
representative.
Remarks
Unplug the appliance
from the socket.
Remove the container
and clean the axis and
mixing propellers.
Remove the container
from the appliance. You
may wash it in the dish
washing machine.
Clean the appliance after
you unplug it from the
socket. Prevent water
from accessing the motor
and body of the appliance.