Sears Kenmore Elite MICROCLEAN 665.1482 Serie Manual De Uso página 18

Delay Hours
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during off-peak
hours when possible.
To delay the start:
1. Select a wash cycle and options.
2. Press DELAY HOURS to choose the number of hours to be delayed.
3. Press START/RESUME.
NOTE: Anytime the door is opened for more than 5 seconds (such as, to add a dish), the Start/Resume button must be pressed
again to resume the delay countdown.
Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles or unintended cycle and option changes
during a cycle. When Lock On is lit, all buttons are disabled. The dishwasher door can still be opened/closed while the controls
are locked.
To turn on Control Lock
Press and hold SANI RINSE for 3 seconds. A message on the LCD will confirm that the controls are locked. If you press any pad
while your dishwasher is locked, the LCD will display a message indicating the controls are locked.
NOTE: The dishwasher cannot start if the control is locked.
To turn off Control Lock
NOTE: You may need to disable Sleep Mode by pressing either START/RESUME or CANCEL/DRAIN, or by opening and closing
the door before you are able to turn off Control Lock.
Press and hold SANI RINSE for 3 seconds. The light turns off. A message on the LCD will confirm that the controls are unlocked.
Cycle Indicators and Time Display
_VASHING SANITIZED
DRYING COMPLETE
WASHING _ SANITIZED
DRYING COMPLETE
The indicators glow when the dishwasher is washing, drying, complete, and/or sanitized. They also glow
when the control is locked and/or the delay option is selected.
The Status Display is used to follow the progress of the dishwasher cycle and to show other information.
Estimated cycle time is displayed in hours and minutes as you make cycle and option selections. After you
start the dishwasher, the display counts down the time.
When you select the Delay option, the time display will give the number of hours followed by an "H".
Selecting Cycles and Options
1. To repeat the same cycle/options used on previous cycle, press START/RESUME once to show which selections you used. To
change cycle, select desired cycle.
2. Select the desired options, then press START/RESUME to start the cycle. Not all options are available for every cycle. If an
invalid option is selected for a given cycle, the lights will flash.
Turning the Sound On and Off
Press and hold HI TEMP WASH for 3 seconds to toggle sound On and Off. The sound will not deactivate for cycle interruption or
service required messages. A screen on the Text LCD will confirm when the sound has been turned Off or On.
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door.
2. Press and hold the CANCEL/DRAIN button until the Cancel/Drain light turns on.
3. Close the door. The dishwasher starts a drain cycle if water remains in bottom of dishwasher. Let the dishwasher drain completely.
The Cancel/Drain light turns off after 2 minutes.
18