Descargar Imprimir esta página

How To Use - Sinbo SD 6802 Instrucción Del Uso

Dispensador con sensor del jabón líquido y desinfectante

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

HOW TO USE

more liquid in the reservoir.
To thoroughly flush out the unit, you may wish to add some water to the reservoir and
repeat the rinsing process. The drip tray can easily be detached for cleaning when
necessary.
IMPORTANT
* Hands Free Soap & Sanitizer Dispenser uses a sensitive infrared sensor circuit. To
avoid accidental triggering, please do not place Hands Free Soap & Sanitizer Dispenser
in direct sunlight.
* After a period of Inactivity, the lotion inside Hands Free Soap & Sanitizer Dispenser
may become dry and clog Hands Free Soap & Sanitizer Dispenser. Should this occur,
simply use a toothpick or water to remove the obstruction.
* The only part of Hands Free Soap & Sanitizer Dispenser designed to be wet is the liquid
reservoir and spout. Do not immerse Hands Free Soap & Sanitizer Dispenser in water
as the product will be damaged.
CAUTION
Immediately dispose of used batteries safely. Keep all batteries away from children.
Batteries and screw are small objects and could be ingested. If swallowed, contact a
physician at once. Do not open battery, dispose of in fire or attempt to recharge. Do not
mix the new and used batteries in the same compartment.
IMPORTANT
Care and Maintenance
* To remove batteries from the battery compartment if the Liquid Motion is to be left
unused for a long time.
* Don't try to examine or repair the unit by yourself. Modifications not approved by the
party responsible for compliance could void user's authority to operate the equipment.
* Clean the case of unit with the dry cloth only and do not clean with any corrosive
substance.
Instruction for use
1. Always purchase the correct size and grade of battery most suitable for the intended
use.
2. Replace all batteries of a set at the same time.
3. Clean the battery contacts and also those of the device prior to battery installation.
4. Ensure the batteries are installed correctly with regard to polarity + and -.
5. Remove batteries from equipment which is not to be used for an extended period of
time
6. Remove used batteries promptly.
- 7 -

Publicidad

loading