Coffee Flow; Using The "Crema" Filter Holder; Using The Brass Filter Holder - Saeco GRAN CREMA DE LUXE CUL SIL SIN010 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 54
24
and press the coffee switch (4).
• Wait until a steady stream of water flows
from the tube ("Pannarello").
• Press the coffee switch (4) again and close
the "hot water/steam" knob (6), turning
it in a clockwise direction.
The machine is now ready to make a perfect
cup of coffee.
5

COFFEE FLOW

Warning! Do not remove the filter
holder by turning it manually in a
clockwise direction while the machine is
producing coffee. Danger of burning.
• While the machine is working the
"machine on" light (9) will go on and off.
This is perfectly normal.
• Before using the machine, make sure that
the "hot water/steam" knob (6) is closed
and that there is sufficient water in the tank.
• Turn on the machine. If the coffee maker
is not working the light on the inside of
the main switch (3) will light up.
• Wait for the "machine on" light (9) to be
on. Now the coffee maker is ready.
Note: we recommend emptying
the water tray when the level
float (12) rises.

5.1 Using the "Crema" filter holder

• Place the filter (14) inside the "Crema"
filter holder (13).
Fit the "Crema" filter holder into the
coffee outlet socket (7), pushing it
upwards and turning it to the right until it
locks into place.
• Let go of the filter holder handle.
Automatically the handle will move slightly
to the left. This movement guarantees the
perfect functioning of the filter holder.
Place a cup under the filter holder.
To warm up the filter holder and the cup,
press the coffee switch (4); water will
begin to drip from the filter holder (this
operation is only necessary for the first
cup of coffee).
• When the cup is sufficiently full, press the
coffee switch (4) again.
Remove the filter holder from the
machine by turning it to the left and pour
out any water that is left inside.
• With the special "Crema" filter holder (13)
supplied with the machine, it is not
necessary to change the filter to obtain
one or two cups of coffee.
To make one or two cups of coffee,
add 1 or 2 even measures of ground
coffee to the filter.
• Clean the edges of the filter holder from
any excess of coffee grounds.
Fit the "Crema" filter holder (13) into
the coffee outlet socket (7), as explained
before, pushing it upwards and turning it
to the right until it locks into place.
Position two warmed cups under the
filter holder, making sure that they are
directly under the coffee spouts.
• Press the coffee switch. Wait until the cups
are sufficiently filled.
• Press the coffee switch again to stop the
coffee flow.
When the coffee flow has ceased,
remove the filter holder and empty out
the excess coffee grounds.
Cleaning note: always keep the
"Crema" filter holder clean by
removing it and washing it with drinking
water.

5.2 Using the brass filter holder

• Place the filter (16 or 17, single or twin
cup, depending on the number of
COFFEE FLOW

Publicidad

Tabla de contenido
loading

Tabla de contenido