Husky 27BC401BP-THD Guia De Inicio Rapido página 3

INSTALL LEVELING FEET
Items Needed:
DD - Screw Leveler (Qty:4)
Process:
• Install (4) levelers DD. Some adjustment may be
necessary after cabinet is in desired location.
• Stand cabinet upright.
• Re-install drawer removed in Step 1. (See Operation
Section B)
• Carefully place stainless top back on top of unit.
• Move unit to desired position and check that unit is level.
If needed, adjust leveling feet (See Operations
Section D).
REMOVING PROTECTIVE FILM FROM STAINLESS
STEEL
• Starting at one of the corners, peel back the protective
coating from the stainless top.
• Be sure to remove all the protective coating before
initial use.
• Follow the cleaning methods in the maintenance
section to keep the stainless looking new.
DD
3
OPERATION
REMOVING DRAWERS
• Empty the drawer.
• Fully extend the drawer.
Lever Style - Lift or lower (depending on the slide) the
release lever on both sides, (this allows the slides to ride
over the stops.) Pull out to remove.
Tab Style - Depress the release tabs on both sides,
(this allows the slides to ride over the stops.)
Pull out to remove.
Release