PROZIS Helix Manual Del Usuario página 8

INSTRUCTIONS
How to use
OPERATING INSTRUCTIONS
• The drone will follow your hand movement in any direction: forward, backward, left or right.
1
3
Gesture remote controller calibration:
• Place the drone on the level ground, with its back facing the controller.
• Switch on the drone by long pressing the power switch. Turn on the controller by short
pressing the power switch. Both their lights will flash.
• At this moment, controller and drone frequencies will automatically connect and lights will
stay on.
• Recalibrate the controller if flight status is unstable or failling. To recalibrate, place the
drone in a horizontal position and turn your hand 180º. The drone light will flash for 3 sec-
onds and then remain steady, which means recalibration was successful.
Take-Off / Landing
• Make sure your body is more than 1 meter away from the drone and place the controller in
a parallel position to the ground.
• Double press the take-off/landing button. The drone will take off automatically and will hold
an altitude of about 1.2 m from the ground.
• Double press the button again, and the drone will automatically land.
2
4
EN
8