Lovi Protect PA103 Manual De Instrucciones página 4

With the thumb and fore-finger of the other
hand, hold the tip of the one-way valve and
place the flat circular bottom into the opening.
Be sure not to stretch, bend, or twist the tip of
the one-way valve. Seal the edges of the flat
circular bottom firmly.
NOTE: The one-way valve tip does not have to
align with anything, as long as all the edges are
securely sealed.
With your thumb and fore-finger, gently smooth closed
and opening on the tip of the one-way valve and shape
into a straight line.
NOTE: This is critical to the optimal performance of the pump.
instrukcja laktator reczny ALL (medyczny)_k002+notatki.indd 4
ASSEMBLING INSTRUCTION
2-PHASE LOVI MANUAL BREAST PUMP - PROTECT
Hold the „Horn" of the breastshield body in one hand.
Make sure the bottle thread side opening is facing up.
Carefully twist the bottle adapter to the breastshield body for a secure fit
NOTE: Be sure not to pucker the one-way valve when twisting the breastshield
body & the adapter pieces together. If you pucker the one-way valve, repeat
above steps.
With the bottle adapter in one hand, twist
the collection bottle for a secure fit.
Holding manual silicone diaphragm in one hand (concave side up), put the
valve stem through the diaphragm so that the wide end of a valve stem
becomes the diaphragm base. Place the adjusting valve on the narrow end of
valve stem so that it covers the ending completely.
NOTE: Valve stem and adjusting valve need to be tightly connected.
4
flat circular bottom
tip
05.10.2016 15:28:22