Sony NUA-BK30 Manual De Instrucciones página 30

If the lid of the cable cover was
not removed, route via (A) in the
following diagram.
Cable connecting the IP
converter and monitor
Route via (A) in the following
diagram.
(B)
(A)
Attaching the AC Adaptor
The AC adaptor bracket can be used
when you want to mount the
AC-82MD AC Adaptor close to the
monitor.
When using the AC adaptor
bracket
The attachment point of the AC
adaptor bracket varies depending on
the monitor. For details, refer to the
"Attaching the AC adaptor" section in
the "Attachment method for
monitors" document. This document
describes the attachment on the left
side, as viewed from the rear of the
monitor.
1
Remove the screw from the AC
adaptor bracket to remove the lid.
The removed screw will be used
later to attach the lid.
12
Mounting
GB
(C)
2
Place the AC adaptor bracket in
position (A) in the following
diagram, and attach the bracket
using three supplied M4 screws
(large) at positions (B), (C), and
(D).
Attach the screw at position (B) to
the arm bracket.
(A)
(B)
(C)
(D)