Oxygenics Genius DRENCH Instrucciones De Instalación

D
RENCH
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
Screw the diverter
clockwise onto the
taped portion of the
shower arm. Wrap
plumber's tape 3 turns
around threaded ends
of the diverter.
ATTENTION:
WASHERS PRE-INSTALLED IN HOSE ENDS
Washers must be inserted into both hose ends for proper installation.
EASY TWIST
SPRAY SELECTION
Enjoying multiple spray patterns
during your shower has never
been easier. With the Drench's
easy twist design, simply rotate
the easyspray selector for a quick
spray change.
STEP 2
Remove any remnants
of old plumber's tape
and flush out shower
pipe for 5 to 10
seconds.
STEP 5
In a clockwise
direction, screw fixed
unit onto the taped
portion of the diverter
and hand tighten.
USING THE DIVERTER
To change the shower spray: Place your index finger
on one lever and your thumb on the other lever and
rotate either clockwise or
counter clockwise
(depending on the
current position) until
you feel it click
into place.
STEP 3
Wrap plumber's tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 6
Attach end of hose
to diverter and hand
tighten. Attach
other end of hose
to handheld shower
and tighten. Place
handheld unit into
holder on right side of
the diverter.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.