Taking Pictures - Zagg Now Cam Instrucciones

TAKING PICTURES

Taking pictures with your Now Cam camera is as simple as pointing and
shooting. Here's how to do it:
1. Ensure your Now Cam camera is turned on by pressing and holding the
Camera Power/Shutter button for three seconds. A tone will sound and the
LED next to the camera lens will light red, indicating it is powered on.
2. Turn the camera dial so that the camera icon is aligned with the red
selection nub.
3. Press the shutter button once.
4. Each time you take a picture, a shutter click will sound and the LED next to the
mounting magnet will blink red once. Note: If you are playing music while
taking pictures your music will fade for the shutter click and then resume
playing automatically. This is so you can verify a picture has been taken.
CAPTURING BURST VIDEOS
Your Now Cam is able to capture short six-second videos – perfect for sharing
your good times on social media. Recall, your Now Cam does not need to be
connected via Bluetooth in order for the camera to work. Here's how to snag
those short clips:
1. Ensure your Now Cam camera is powered on as described above.
2. Turn the camera dial so that the 6s icon is aligned with the red selection nub.
3. Press the shutter button once.
4. A tone will indicate the camera is warmed up and recording. If you were
playing music when you begin recording, your music will mute until recording
stops; after you stop recording it will resume playing automatically.
5. While recording, the LED next to the camera lens will flash red every
second. Your Now Cam will automatically stop recording after six seconds;
you can also press the shutter button again to stop recording.
CAPTURING CONTINUOUS VIDEO
For those times when you need more than a picture, or longer than six seconds
of recording, your Now Cam is ready to record up to 30 minutes of continuous
video. Recall, your Now Cam does not need to be connected via Bluetooth in
order for the camera to work. Keep reading to see how it's done.
5