Timer Setting; Cleaning And Maintenance - TaoTronics TT-AH015 Manual Del Usuario

Humidity Setting
M
1. Tap the Humidity / Sleep Mode Button once to set the humidity, the humidity
indicator will light up accordingly, and the humidity level on the display will keep
ashing, before the ash ends, tap the Humidity / Timer Level Buttons to adjust the
humidity from 30% to 95% with an increase / decrease of 5% by each tap. Once
set, the humidity level on the display will ash 3 times to con rm the setting.
2. Tap the Humidity / Sleep Mode Button again to exit the humidity setting, humidity
indicator will light off accordingly.
Sleep Mode
M
1. Tap and hold the Humidity / Sleep Mode Button for 1.5 seconds to enter sleep
mode. The LED display and all the indicators except the sleep indicator will turn
off after 5 seconds. Tap any button to wake up the screen.
2. In sleep mode, all the buttons remain functional.
3. Tap and hold the Humidity / Sleep Mode Button for 1.5 seconds again to exit sleep
mode with the sleep indicator turning off.

Timer Setting

Tap the Timer Button once, the timer on the display will keep ashing, before the ash
ends, tap the Humidity / Timer Level Buttons to set the timer from 00 hour to 12 hours
with an increase / decrease of 1 hour by each tap. The timer on the display will ash
3 times to con rm the setting. Once set, the LED display will show the current RH and
the set timer alternately.
Low Water Protection
When all water inside the tank has been depleted, the humidi er will turn off
automatically and the water level indicator will turn red.
Humidity
Sleep
M

Cleaning and Maintenance

1. Fill the water tank half full, and add 100ml 5% white vinegar. Run the humidi er for
5 - 10 minutes to allow the vinegar / water mixture to work through and loosen up
the gunk.
1 2 3 4 5
H
%
Water Level
05/06