Warning Indicators; Cleaning And Maintenance - Kalorik EKS 40758 Manual De Instrucciones

Fax +1 305 430 9692
RETURN TO REAL TIME MODE
In weighing mode, simply press the "Mode" button to return to the real time
display mode. The scale will also return automatically to the real time
display if left idle for 120s.
Important Notice: the scale's display does not shut off at any time. The idle
state is the real time display mode.

WARNING INDICATORS

1. If the "Lo" symbol is displayed on the LCD screen, it means that the
batteries of your scale are low and should be replaced soon. Please
dispose of the old batteries in an environmentally
friendly way.
2. If the "Err" symbol appears on the LCD screen, it
means that the maximum weight accepted by your
scale is exceeded, please remove the object from the
scale in order not to damage your scale.
BATTERY
If your appliance does not work properly, it is probably because the
batteries are discharged. In that case, replace them by new ones of the
same type (see paragraph "Before the first use").
Please dispose of the old batteries in an environmentally friendly way.

CLEANING AND MAINTENANCE

Be careful when manipulating the scale because it is a precision
•
device.
Clean the outside parts only with a lightly damp cloth.
•
Never use abrasive products to clean your scale.
•
NEVER USE THIS APPLIANCE NEAR WATER; NEVER IMMERSE IT IN WATER
•
OR ANY LIQUID WHATSOEVER.
Keep the scale in a cool and dry place.
•
Clean all plastic parts immediately after contact with fat, acid, spices,
•
vinegar or strong flavored or colored food.
No liability will be taken for damages caused by an inappropriate use.
•
The warranty becomes null and void if the appliance has been opened
or damaged.
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame,
9
Assembly page 9/36
special instruction from Team
Print only
EKS 40758 - 120501