Descargar Imprimir esta página

T.I.P. HNB 1600 Manual Del Usuario página 10

Limpia estanques. aspiradora. aspiralíquido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
US GE S POND CLE NER
• Be sure that switch is in off position (0) OFF and
connect the machine to a suitable socket.
• Place the machine near the pond/lake keeping
safety distance of 2 mt from the border.
• The machine must be always kept on horizontal
bases, in a safe and stable way.
• Place the drainpipe (C) in the correct direction
where the full tank will be discharged from
waste water previously vacuumed.
• Check that the drainpipe is lowered so that the
water drains off and avoid that the machine and
electric cable get wet .
• Insert the suitable filters for the proper use.
• Immerge extension hoses (M) with the pond
cleaner nozzle (O) in the water, reacing the
bottom of the pond/lake.
• Put switch (B) on (–)
order to start the machine.
• The machine starts working approximately
10 sec. later to allow the operator to join the
working position.
fter a working cycle of about 50 sec. the
machine switches off automatically for 20 sec.
to allow draining of the tank.
• When draining cycle is finished the machine
starts automatically.
In case of tank filling before 50 sec. During
vacuum phase, the internal gauge of the motor
head stops the vacuum function. Leave the
machine working.
• The waste water vacuumed is collected from
filter (D) situated in the final part of the drainpipe
(C).
• Be sure that draining filter (D) do not prevent
the flow of the water. Otherwise clean it.
• When job is over, switch off (0) OFF and keep
away the plug from the socket.
• Drain waste water from the tank and clean the
accessories before storing the machine.
10
UTOM TIC position in
max
1,5 mt
US GE S
"WET & DRY V CUUM CLE NER"
• Be sure that the switch is placed in position (0)
OFF and connect the machine to a suitable
socket.
• Insert the proper filter suitable for the requested
usage.
• Put the stopper (F) on the tank (I).
• Use the most suitable accessories for the
requested usage.
• Place the switch (B) on (=) M NU L position to
start the machine.
When the switch is placed on (=) M NU L
position, the machine works continously, without
on/off cycles.
GB

Publicidad

loading