Klarstein REINRAUM 2G Manual De Instrucciones página 18

EN
18
Dry vacuuming
1. The power plug must be pulled out.
2. Place the dust bag over the container. Pull the hole in the bag all the way over
the inside connector until it stops.
3. Put the upper structure back up and secure it with the clamps.
4. Plug the other end of the suction hose onto the suction connection on the
container and let it click into place. Attach the required attachments to the
other end of the hose.
5. Connect the power plug to a power supply. Turn on the motor to vacuum.
6 When you have fi nished vacuuming, switch the device off (position '0') and pull
out the plug.
Wet vacuuming
CAUTION
Risk of fi re! Pull out the power plug before opening the device. Do
not vacuum solvents, explosive or fl ammable liquids such as petrol,
oil, alcohol, paint, thinner, acids or the like.
Note: The container is not suitable for liquids. Remove all liquid from the
container after use. Do not store the vacuum with liquid in the container.