Bosch IXO Serie Manual Original página 14

14 | English
(2) Tool holder
(3) Locking sleeve
(4) Unlocking ring
(5) Rotational direction switch
(6) On/off switch
(7) Rubber cap
Technical Data
Drilling adapter
Article number
Weight according to
EPTA-Procedure 01:2014
Max. torque
Max. speed
Max. screw diameter
Max. drilling diameter
Assembly
Attaching the drilling adapter (see figures A1–A2)
Before fitting the drilling adapter (1), the rubber cap (7) of the screwdriver
must be pulled off toward the front.
Then attach the drilling adapter (1) to the screwdriver. You can fit the
drilling adapter with the padlock symbol towards the top at the unlocking
ring (4) or offset by 45°. The drilling adapter must audibly engage.
Removal (see figures B1–B2)
Turn the unlocking ring (4) in rotational direction ➊ and pull off the drilling
adapter toward the front (➋).
Afterwards, fit the rubber cap (7) onto the screwdriver again.
1 609 92A 5M1 | (09.04.2020)
1 600 A00 4ZB
kg
Nm
-1
min
mm
mm
Bosch Power Tools
Drill
0.12
1.7
440
4
5