Klarstein SKAL Manual De Instrucciones página 40

EN
40
TROUBLESHOOTING
Note: If the beer cooler does not work properly, please call the service centre. To
save time and money, before you call for service, check the Troubleshooting Guide. It
lists cause of minor operation problems that you can correct yourself.
Problem
The tap does not work /
can't pour beer out.
Too much bubble pouring
out.
Possible Cause
The pouring tube is in
poor connection or CO
₂
supplying is cut off
No keg or no beer in the
keg.
No gas in the CO
₂
cartridge.
The CO pressure regulator
₂
knob is closed.
Use a wrong way to pour
beer out.
The beer temp is high
(better at 3-5 °C.
The keg is shaken before
usage.
Almost no beer in the keg.
Too much pressure in the
keg.
Suggested Solution
Well connect the pouring
tube and CO supplying.
₂
Change a new keg.
Change a new CO
₂
cartridge.
Turn the CO pressure
₂
regulator knob on "+"
position.
Quickly open the faucet
completely.
Check and find out the
correct distance from the
beer mug to the tap when
pouring wine. Normally
to the height, the normal
foam should be thick and
creamy.
Cool the beer down to
3-5 °C.
Put the beer keg aside a
while till no bubble inside.
Change a new keg.
Adjust the pressure knob to
"-" direction to decrease
the pressure or close the
knob.