HC Cargo 160884 Manual Del Usuario página 3

Installation guide for embeded type sensor
HORIZON
Note: Choice the position about
0.5~0.7m high from the ground
25 25
63
Note: Clean installation
position firstly
90°
Note: Drill orient holes
firstly
Sensor position
Note: 1. Unit : cm ;
2. Sensor position can be adjusted a
50-70
little according to the car body
63
Note: Heating the
face lable, then tear
Note: Use special tools
we prepared to drill. The
best rotational speed:
800~1000 per minutes.
Note: Install the display
firmly
3
160884
Note: Please follow
correct direction to
install.
Note: The connect line
should be invisible
Vedpak 167_Version 1_110609