Behringer RHYTHM DESIGNER RD-8 Guia De Inicio Rapido página 18

18
RHYTHM DESIGNER RD-8
RHYTHM DESIGNER RD-8 Controls
(EN) Controls
Rear Panel connections
(60)
(65) (66) (67) (68) (69) (70) (71) (72) (73) (74) (75) (76) (77) (78) (79) (80) (81) (82) (83)
POWER – Connect the supplied PSU here and engage power switch to
(60)
turn on.
PHONES – Connect headphones via 6.35 mm (¼") TRS connector.
(61)
MONO – Main output via 6.35 mm (¼") TRS connector.
(62)
RETURN – Sums audio post filter bus.
(63)
USB – Connect to a computer for updates and DAW control.
(64)
MIDI IN – To input MIDI from an external MIDI device such as a sequencer
(65)
or DAW.
MIDI OUT – Output of MIDI data to an external MIDI device.
(66)
MIDI THRU – A direct output of the MIDI in to chain to other devices.
(67)
CH INDIVIDUAL OUTPUT – Unbalanced output of the Closed Hat.
(68)
OH INDIVIDUAL OUTPUT – Unbalanced output of the Open Hat.
(69)
CY INDIVIDUAL OUTPUT – Unbalanced output of the Cymbal.
(70)
CB INDIVIDUAL OUTPUT – Unbalanced output of the Cow Bell.
(71)
CP/MA INDIVIDUAL OUTPUT – Unbalanced output of the Hand
(72)
Clap or Maracas.
Software Updates
The RD-8 updater can be downloaded by going to www.musictribe.com. Please follow the steps documented in the release notes accompanying the update.
(61) (62) (63) (64) (84) (65) (66) (67) (68) (69) (70) (71) (72) (73) (74) (75) (76) (77) (78) (79) (80) (81) (82) (83)
RS/CL INDIVIDUAL OUTPUT – Unbalanced output of the Rim
(73)
Shot or Claves.
HT/HC INDIVIDUAL OUTPUT – Unbalanced output of the High Tom or
(74)
High Conga.
MT/MC INDIVIDUAL OUTPUT – Unbalanced output of the Mid Tom or
(75)
Mid Conga.
LT/LC INDIVIDUAL OUTPUT – Unbalanced output of the Low Tom or Low
(76)
Conga.
SD INDIVIDUAL OUTPUT – Unbalanced output of the Snare Drum.
(77)
BD INDIVIDUAL OUTPUT – Unbalanced output of the Bass Drum.
(78)
TRIGGER OUT 1 – +5 v 1ms pulse to trigger external devices.
(79)
TRIGGER OUT 2 – +5 v 1ms pulse to trigger external devices.
(80)
TRIGGER OUT 3 – +5 v 1ms pulse to trigger external devices.
(81)
CLOCK IN – SYNC to external device transmitting clock information.
(82)
CLOCK OUT – SYNC external devices to the Rhythm Designer.
(83)
BOOT – Enter boot mode for software updates.
(84)