Autophix 7910 Manual Del Usuario página 16

3.3 I/M Readiness
I/M refers to Inspection and Maintenance, that is legislated by
the Government to meet federal clean-air standards. I/M
Readiness indicates whether or not the various emissions-relat-
ed systems on the vehicle are operating properly and are ready
for Inspection and Maintenance testing.
The I/M readiness Monitor Status function also can be used
(after repair of a fault has been performed) to confirm that the
repair has been performed correctly, and/ or to check for
Monitor Run Status.
Diagnostic Menu
Read Codes
Erase Codes
I/M Readiness
Data Stream
Evap System Test
Vehicle Information
3.4 Data Stream
The OBDII Scan Tool is a special diagnostic tool that communi-
cates with the vehicle's computer. The Scan Tool lets you view
"real-time" Live Data. This information includes value(volts, rpm,
temperature, speed etc.) and system status information (open
loop, closed loop, fuel system status, etc.) generated by the
various vehicle sensors, switches and actuators.
Press ENTER
Diagnostic Menu
Read Codes
Erase Codes
I/M Readiness
Data Stream
Evap System Test
Vehicle Information
Since DTCs Were Cleared
This Drive Cycle
3/6
View All Items
Select Items
4/6
15
I/M Readiness
Datastream
1/2
1/2