After-Sales Service And Advice On Using Products - Bosch YOUseries Vac Manual Original

– Pull the fine dust filter (15) out of the coarse dirt filter (14) using the removal
pin (16).
– Tap the fine dust filter (15) carefully over a suitable waste bin. If necessary, brush the
flaps of the fine dust filter with a soft brush.
– To assemble, perform the same steps in reverse order.
Faults
If the suction power is insufficient, check:
– Is the dust container (8) full?
▷ (see "Cleaning the dust container (see figures C1–C2)", page 22)
– Are the filters ((14), (15)) clogged with dust?
▷ (see "Cleaning the filters (see figures D1–D5)", page 22)
– Is the state of charge of the battery (3) too low?
▷ (see "Battery charging (see figure A)", page 19)
Regularly emptying the dust container and cleaning the filters will ensure optimum suc-
tion power.
If suction power is still not sufficient, take the vacuum cleaner to the after-sales service.

After-sales service and advice on using products

Our after-sales service can answer questions concerning product maintenance and re-
pair, as well as spare parts. You can find exploded drawings and information on spare
parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the type plate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product
in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Bosch Power Tools
English | 23
1 609 92A 4G2 | (19.12.2018)