BenQ treVolo S Guía Rápida página 4

Buttons & connectors
A. Play/Pause
B. Volume down
C.
®
Bluetooth
D. LED indicator for
®
Bluetooth
Pairing and connecting Bluetooth
1. Have the power adaptor plugged in. Press and hold the power button for 3 seconds.
2.
Press and hold the Bluetooth
The LED indicator for Bluetooth
3.
Turn on Bluetooth
4. Flip out both speaker panes and enjoy your music.
•NFC-enabled devices can wake up treVolo S, and treVolo S can automatically connect to
®
Bluetooth
•treVolo S can paired with another treVolo S to perform Duo mode. See more information on the
user manual.
Recommendations
• Download the app "BenQ Audio" to your Android™ or iOS devices from respective
application stores to indulge in the best music playing experience.
• To flexibly tune in with the speaker everywhere for optimal acoustics, have it charged
beforehand and put it in an open space.
• The LED indicator of power button is lit in green with 81% or more of remaining power, in
yellow with 80%~31% of power, and in red with 30% or less of power.
• The LED indicator of power button also indicates non-distorted 3D sound of "on" in green
and of "off" in red. The LED indicator of power button mentioned above all flash for about 5
seconds.
• The input priority of sound is USB > line-in > Bluetooth
• On details of treVolo S or other products by BenQ, check out BenQ's official website at
www.BenQ.com for further information.
Music playing variations
Connecting to your devices using a
cable.
E.
F.
G.
H.
®
of your device to discover and pair with "treVolo S".
of the devices when they are close to each other.
LED indicator for
Power
Power
Volume up
Sound mode (3D)
®
button for 3 seconds to make the speaker discoverable.
®
will blink in blue.
I. NFC
J. Micro USB port
(charger-in jack)
K. Line-in jack
®
devices
®
.
LINE IN
or