HAMPTON BAY 23055-002 Guia De Inicio Rapido página 2

Installation
1
Preparing the unit for installation
Carefully unpack and lay all parts on a clean, level surface.
Unscrew the canopy nuts (C) from xture assembly (B) and
detach the mounting bracket (A).
Attach the mounting bracket (A) to the junction box
(not included) with junction box screws (AA).
3
Installing the
Place the xture assembly (B) against the mounting surface,
allowing the preassembled screws on the mounting
bracket (A) to pass through the xture assembly (B) and
secure with canopy nuts (C).
A
B
C
A
AA
xture
A
B
C
2
Making the electrical connections
NOTE:
Lift up the xture assembly (B) toward the ceiling.
Connect the white wires from the fixture to the white wire of
the supply circuit.
Connect the black wires from the fixture to the black wire of
the supply circuit.
Wrap the bare copper grounding wire from the xture around the
green screw on the mounting bracket (A), then connect it to the
grounding conductor of the supply circuit.
Use U.L./C.S.A. listed wire connectors (BB) suitable for the size,
type and number of conductors. Secure the wire connectors (BB)
with U.L./C.S.A. listed electrical tape.
4
Position Adjustment
Adjust the head (D) to your desired position by turning
the swivel joint slightly.
Restore electrical power when complete. Turn on lamp
using the wall switch.
D
For Customer Assistance:
www.luciditylights.com
Made In China
2
Make the connections to a 120V AC 60Hz circuit.
A
BB
B