Using Your Blender - TEFAL PerfectMix+ Tritan BL82AD40 Manual Del Usuario

• Make sure the evacuation hole on the motor block (A) is not blocked by
food or other things when using
• The appliance will start only if the blender jug is locked correctly on the
motor unit.
• Do not operate the appliance if the lid is not in place.
ASSEMBLING AND FITTING THE JUG
Moisten the seal (F3, O3) (even if already fitted on the blade unit
(F1, O1)). Be careful to correctly fit the seal (F3, O3) back onto the blade
unit (F1, O1) the correct way up (Fig 17).
• Check the seal is in place on the blade unit.
• Turn the jug upside down and place the blade unit on the base of the
jug (Fig 1, Fig 7).
• Fit the locking ring (Fig 2 / Fig 8) and lock it by rotating to lock notch in
the clockwise direction (Fig. 3, Fig 9).
• Make sure the locking ring is locked correctly : the two arrows must be
aligned (Fig 3, Fig. 9).
• Add the ingredients to the assembled jug without exceeding the
maximum level indicated:
* 1.5 L for thick mixtures
* 1.25 L for liquid preparations
Warning : Do not pour boiling liquids (over 80°C/176°F) into the jug.
• Fit the lid (F5, O5) on the jug (Fig. 6, Fig. 12). To avoid any splashes
during blending make sure that the curved tabs on the lid are aligned
with the spout and handle (Fig. 5, Fig. 11) . Fit the measuring cap (F6,
O6) in the hole on the lid (Fig. 8). Then position the bowl on the motor
unit and turn it 1/4 turn clockwise (Fig 4 / Fig 10)

USING YOUR BLENDER

• Once the blender jug is locked correctly on the motor unit, plug in the
appliance. The lights on the appliance flash twice and you hear a beep.
Turn it on using the desired function.
• Speed selection: Turn the control knob (E) to choose the desired speed;
the speed increases gradually between min and max. The intensity of
the lights on the appliance increase gradually as the speed increases.
You can change the speed as required during preparation.
EN
95