Sinbo SSI 2862 Manual De Uso página 9

indicator pilot light will light, put the iron on the smooth and stable place vertically.
* After the indicator pilot light goes out, you can begin to iron.
SPRAYING
* Ensure there is enough water in the water tank.
* Press the spray button to produce a fine spray of spray nozzle and continue ironing.
NOTE: Do not spray silk.
STRONG STEAM
* Ensure that there is enough water in the water tank.
* When the temperature control knob is set to steam setting (between "• •" to "MAX") strong
steam can be used.
* Press the burst steam button (5), the soleplate will spray out strong steam.
NOTE:
* Only use the steam push button when the steam iron has reached the steam or maximum
temperature.
* Do not press this burst steam button more than 3 times at once. For optimal steam output,
leave an interval of at least four seconds between pressing the burst steam button.
* The burst steam feature can be used with Dry or Steam ironing as desired.
* ATTENTION: Never direct the steam towards people. Burns or serious injury may occur.
VERTICAL SHOT OF STEAM
* When the temperature control knob is set to a steam setting (between "• • " to "MAX") vertical
steam can be used.
* Simply hold the iron vertically, positioned in front with a slight distance from the item to be
steamed, and press the burst steam button.
* ATTENTION: Never direct the steam towards people. Burns or serious injury may occur.
FOLDABLE HANDLE LOCK
* Before ironing, at first raise the handle until it locks into position.
* For storing press the lock down to close the handle.
CARE AND CLEAN
* Before cleaning, set the steam control knob to the "0"or " " or " ", unplug the iron from
wall socket, and allow the appliance completely cool down, and then clean with a damp cloth,
do not immerse the unit into water or other liquids.
* Regularly rinse the water tank with water, empty the water tank after clean.
* If ironing clothes with high temperature, which is not recommended on the garment table,
will cause burns to your clothes and residue left on the soleplate of the unit, it is proposed to
iron a old cloth to remove these residue from the soleplate.
* If you use spray starch, wipe the soleplate occasionally with a soft damp cloth to prevent the
build-up of deposits.
* After use, set the steam control knob to the "0"or " " or " ", disconnect the unit from
main socket, empty remaining water from water tank and then store the iron after it has been
- 8 -