WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS
EN
Problems when steam
Manual mode
The appliance does not
Excessive vibration.
Slight noise during
operation
CAUSES
The steam regulator cap is not
properly positioned or is missing.
Unsuitable recipes
It is not plugged in.
The switch (H) is in position 0.
The bowl or the lid are not correc-
The lid is not fully assembled.
The appliance is not positioned on
stable.
Volume of ingredients too high.
Accessory error.
The spindle of your appliance may
create a noise during operation at
reduced speed or with the use of
certain ingredients (rice...)
approximate. However, certain conditions
- size of the vegetables (cut or uncut)
- type of vegetables, their ripeness
- quantity of water in the bowl, which
corresponds to the measurement (0.7l).
You can also use the manual mode by
type of ingredients.
maximum amount of steam to build up in the
etc.), so there will be more steam in the bowl
This position also helps to avoid splashing
allows a maximum amount of condensation
sauces and dishes such as risotto, egg custard
desserts, etc.
Internet may not be suited to your appliance and
inadequate accessories). Before starting your
provided in this manual.
diagrams in the instruction manual.
the seal holder and that the seal holder is fully
pushed onto the lid in all places.
Reduce the quantity of ingredients pro-
cessed.
accessory.
This is a temporary phenomenon, which
has no consequences on the life of your
appliance. It will fade or disappear after a
few uses and cleaning operations of the
removable spindle (refer to the paragraph
30
SOLUTIONS
-