Zyxel NXC5200 Guia De Inicio Rapido página 9

ENGLISH
IP Setting
By default, the NXC5200 is set up to be connected to an upstream
gateway for WAN access and you do not need to make any special
configuration changes to it. The upstream device should have a
connected DHCP server running to provide all IP addresses for
downstream devices, including the connected APs. All you need to do is
connect the devices as described in Hardware Connections on page 4.
Configuring the NXC5200's IP Address
The NXC5200's default default IP address is 192.168.1.1. This section
shows you how to change it to use an IP address consistent with your
own network's topology.
1. Click Configuration > Network > Interface > VLAN..
9