AKASO Brave 7 LE Manual Del Usuario página 13

EN
2. Video Record: Off/On
Default setting is On.
3. Image Stabilization: Off/On
Default setting is Off.
This setting adjusts the footage to offset for motion during capture. The result is
smoother footage, especially in activities with relatively small but fast motion
including cycling, motorcycling, and handheld uses.
Note: Image stabilization cannot be activated when the video resolution is
1080P120fps, 720P240fps and 720P120fps.
4. Video Quality: High/Middle/Low
Default setting is Middle.
5. Wind Noise Reduction: Off/On
Default setting is Off.
Turn on Wind Noise Reduction, it can lower the noise to an acceptable level.
6. Auto Low Light: Off/On
Default setting is Off.
Auto Low Light mode will automatically adjust settings according to lighting
conditions to achieve the best low light performance. Even if you move back and
forth between bright and dark environments, you do not need to manually adjust
the camera settings.
Note: Auto Low Light setting is only applied to the video whose frame rate is 60fps
or above.
11