Functions - EAS ELECTRIC EHF205RC Manual De Instrucciones

lnitial use
Take the appliance out of the package and remove ali the packaging material.
Place the fan heater on a level and flat surface so that the tilt protection at the
bottom is not actuated. Connect the appliance to a 220-240V AC socket.
To start the fan heater, press the "Power" button on the control panel or on
the remote control. The fan heater now starts to heat. Press the "Tempe-
rature" button to adjust the desired temperature. The display shows the set
temperature above the button on the fan heater. The heater will start heating
if the set temperature is higher than the roam temperature. The fan heater
has 3 heating medes.
You can navigate through the different heating modes by
pressing the "Mode" button.

FUNCTIONS

ECO Mode
The default setting of the temperature in this mode is 24ºC when the ECO
energy saving mode is selected. Based on the current temperature and the
target temperature of 24ºC, the heater automatically selects the heating level
to reach the target temperature.
Remote control
Use 2x 1,5V AAA batteries for the remote control. All the functions that can be
performed using the remote control have the identical function as those on
the control panel of the fan.
Oscillation
To turn the oscillation on or off, press the "Oscillation" button on the control
panel at the top of the fan or on the remote control.
Timer function
You can enable the timer function by pressing the "Timer" button. The
currently configured timer stage is displayed.
- ECO Mode
- Heat setting 1
- Heat setting 2
7 V.1