Fault Identification - Oregon JW3800 Operación Manual

Troubleshooting
If the problem you are having is not covered below, or is not solved by following the advice outlined,
please call our technical helpline or visit the website for further guidance.
The Engine will not start.
•
Have you added fuel to the engine?
•
Check that the engine is not flooded by closing the throttle and trying to start the unit,
also remove the spark plug and dry.
• Is the spark plug dirty , remove the plug and check for carbon residue
Engine stalling
•
Adjust the idle speed (page 5)
• Check fuel for water contamination and replace
• Clean the air filter
•
Check oil quality and replace if required
The saw is not cutting properly
• Check chain tension
• Sharpen chain with a chain file
•
Replace chain
I have a faulty part
•
Go to www.trueshopping.co.uk
Please note that while every attempt has been made to keep this guide up to date, changes can
occur due to design / manufacturing changes, if you have a question regarding a feature that your
product has or is missing, please visit
version of this manual.
to order the required spare.
www.trueshopping.co.uk
18
to download the most up to date
16