Manuales relacionados para KING 900
Resumen de contenidos para KING 900
- Página 1 #42900 KING 900 INSTRUCTION MANUAL WIRE AND VALVE LOCATING SYSTEM WARNING Read and understand all of the instructions before operating this unit. Failure to do so could lead to injury or death.
-
Página 2: Tabla De Contenido
WARNING Hazards which, if not avoided, COULD result in DESCRIPTION severe injury or death. The KING 900 Wire and Valve Locating System is designed to track CAUTION underground wiring, lost sprinkler valves, and broken or severely damaged wires. Hazards or unsafe practices which, if not avoided, MAY result in injury or property damage. -
Página 3: Important Safety Information
CAUTION Electric Shock Hazard. Do not connect transmitter to any active AC circuits. Failure to observe this precaution may result in injury and King 900 Wire and Valve Locating System Includes: can damage the instrument. Receiver Inductive Clamp CAUTION... -
Página 4: Power
POWER DOWN full and reduce as the batteries are depleted. ON, 15 MIN, 30 MIN, 60 MIN • Battery: allows the user to adjust the KING 900 transmitter to be used with either traditional alkaline batteries or rechargeable ones. TRANSMITTER DISPLAY... - Página 5 INSTRUCTION MANUAL KING 900 KING 900 RECEIVER DIRECT CLIP-ON MODE: • Selecting direct clip-on mode provides power to the black and red input leads. • Select LO-F or HI-F .LO-F is used for deep (and,or) long traces. HI-F is used for shallow and/or short traces.
- Página 6 • When the receiver is active it can be switched from PEAK to NULL mode. FINDING FAULTS Breaks or severe wire damage can be found with the KING 900. The setup of the unit is the same as when tracing wire. The difference TRACING WIRE comes in the reception.
- Página 7 Connect the red lead of the transmitter to the station wire leading to is not as precise or strong as direct connecting, but when access to that valve and the black to ground stake. Operate the KING 900 as cables is limited or just a quick scan is required.
- Página 8 OR ANY OTHER COMPONENT TO LIVE ELECTRICAL LINES. DEATH OR INJURY COULD OCCUR. To use the passive mode, turn on the KING 900 Receiver and select the Passive AC mode using the control panel. This switches the receiver into an unfiltered mode that detects the electrical field...
-
Página 9: Specifications
INSTRUCTION MANUAL KING 900 SPECIFICATIONS MAINTENANCE Tracking Range: Depth 8 feet (2.4m) (LO-F, 2kHz) WARNING Tracking Signals: Direct Connect (LO-F) 2 kHz Direct Connect (HI-F) 33 kHz Electric shock hazard: Wireless (BCST or Clamp) 175 kHz Before removing the case or battery cover, remove the test leads from the circuit and shut off the unit. - Página 10 INSTRUCTION MANUAL ©2020 KING Innovation O'Fallon, MO 63366 www.kinginnovation.com MADE IN CHINA 800.624.4320 REV A 11/20...