Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTRUCTION MANUAL FOR CAUNY WATCH
CLG007, CLG008, CLG009, CLG010
Caliber Nº: MI-JS20
Battery: SR621SW
Features: Small second hand time measurement up to 29min 59sec
A) DISPLAY AND BUTTON
B) SETTING THE TIME
1. Pull the crown out to the 1st Click Position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position in synchronization with a time signal,
second hand begins to run.
C) USING THE STOPWATCH
This stopwatch is able to measure and display time in 1second united up
to maximum of 29min 59sec. Stopwatch will stop automatically after
running continuously for 30 minutes.
Measuring time with the stopwatch
1. Press button "A" to start the stopwatch.
2. The stopwatch can be started and stopped each time button "A" is pressed.
3. Pressing button "B" resets the stopwatch and stopwatch minute and second hands return to
their ZERO positions.
* Button A / B does not function during resetting the stopwatch.

Publicidad

loading

Resumen de contenidos para Cauny CLG007

  • Página 1 INSTRUCTION MANUAL FOR CAUNY WATCH CLG007, CLG008, CLG009, CLG010 Caliber Nº: MI-JS20 Battery: SR621SW Features: Small second hand time measurement up to 29min 59sec A) DISPLAY AND BUTTON B) SETTING THE TIME 1. Pull the crown out to the 1st Click Position.
  • Página 2 D) STOPWATCH RESET (INCL. AFTER REPLACING BATTERY) This procedure should be performed when the stopwatch second hand does not return to the ZERO second position after the stopwatch has been reset, and including after the battery has been replaced. 1. Pull the crown out to the 1st Click Position. 2.
  • Página 3: Visualización Y Botón

    MANUAL DE INSTRUCCIONES DEL RELOJ CAUNY CLG007, CLG008, CLG009, CLG010 Nº de calibre: MI-JS20 Batería: SR621SW Características: Medición de tiempo con la manecilla de segundos pequeña hasta 29 minutos 59 segundos A) VISUALIZACIÓN Y BOTÓN B) AJUSTE DE LA HORA 1.
  • Página 4 D) STOPWATCH RESET (INCL. AFTER REPLACING BATTERY) This procedure should be performed when the stopwatch second hand does not return to the ZERO second position after the stopwatch has been reset, and including after the battery has been replaced. 1. Pull the crown out to the 1st Click Position. 2.
  • Página 5: Mostrador E Botão

    MANUAL DE INSTRUÇÕES PARA O RELÓGIO CAUNY CLG007, CLG008, CLG009, CLG010 Calibre No MI-JS20 Pilha: SR621SW Funções: Medição de tempo com ponteiro pequeno de segundo até 29 minutos e 59 segundos A) MOSTRADOR E BOTÃO B) ACERTAR A HORA 1. Puxe a coroa para a posição do 1º clique.
  • Página 6: Reinicialização Do Cronômetro (Inclusive Após Trocar A Pilha )

    D) REINICIALIZAÇÃO DO CRONÔMETRO (INCLUSIVE APÓS TROCAR A PILHA ) Este procedimento deve ser realizado quando o ponteiro dos segundos do cronômetro não volta para a posição ZERO segundo depois de reinicializar o cronômetro e também depois de trocar a pilha.

Este manual también es adecuado para:

Clg008Clg009Clg010