Errors And Troubleshooting - Navitel E700 Manual De Instrucciones

Errors and Troubleshooting

Device does not work
• Check whether the device is charged or not. In case the device
is not charged, connect the power supply and wait at least 5
minutes;
• Press and hold the power button for at least 8 seconds;
• Even if the device is charged, connect the power supply and try
to start the device again;
• If the device does not work even after recharging, contact our
support team or any certified service center.
Device shuts down immediately upon startup
• It is possible that battery charge of the device is critically low.
In such cases, the system shuts down automatically in order to
prevent complete discharge of the battery, which may result
in data loss. Before attempting to turn the device on again,
charge it for at least 5 minutes, and keep the adapter plugged
during subsequent operation of the device.
Fast battery discharge
• The battery discharges much faster in cold environment.
Battery does not get charged
• Check whether the adapter is connected to a socket;
• Make sure that you use the default power adapter and not the
adapter of another device;
• It is possible that battery does not get charged in very hot
climate.
Using device - navitel e700
Sound does not work
• Make sure the sound is turned on in the program settings;
• Make sure the volume is not too low.
Device does not recognize the microSD card
• Make sure the card is fully inserted into the correct slot until it
is locked into place;
• Check that the card is not inserted the wrong way around;
• Check if the card is damaged. Try to use it on another device;
• Re-insert the card. Reboot the device;
• See the installation manual provided with your card.
Cannot copy files
• Check that the connection between your PC/laptop and the
device was established properly;
• The device memory usage may be overflowing and requires
deleting unnecessary files;
| 59
EN