Chapter 8
Cleaning Procedure
Do not use solvents to clean your Remote Speaker Microphone (RSM) as most chemicals may
permanently damage the RSM housing and textures. Do not submerge the RSM in the detergent
solution. To clean the external surfaces of your radio, perform the following procedure:
Procedure:
1 Vacuum the front surface of the RSM. Avoid completely covering the speaker grill and
microphone openings all at once with the nozzle.
2 Mix one teaspoon of mild dish-washing detergent to one gallon of water (0.5 % solution) to clean
the external surfaces of the RSM.
3 Apply the solution sparingly with a stiff, non-metallic, short bristled brush, making sure excess
detergent does not get entrapped near the connectors, controls or crevices. Dry the RSM
thoroughly with a soft, lint-free cloth.
3
MN007601A01-AB
Cleaning Procedure
1
13