Hygiene Treatment - Seca 456 WA Manual De Instrucciones Y Garantía

4. OPERATION

5. HYGIENE TREATMENT

The USB adapter is for transmitting data
seca 456 WA
between
seca 360° wireless
devices made by the manufacturer Welch Allyn. These
instructions for use describe only operation of the
USB adapter. For information about
seca 456 WA
operating your Welch Allyn device, go to
www.welchallyn.com.
1. Plug the USB adapter into a free USB port on your
Welch Allyn device.
2. Secure the USB adapter to stop it being removed
from the Welch Allyn device inadvertently.
3. Set up a seca 360° wireless
in the instructions for use for your
seca 360° wireless
4. If the instructions for use for your
seca 360° wireless
on all the components of a wireless group, switch
on the Welch Allyn device as well.
NOTE
The Welch Allyn device is shown in the display
of the
seca 360° wireless
"MO 4".
5. Continue setting up the wireless network as de-
scribed in the instructions for use for your
seca 360° wireless
►
Use a soft cloth dampened with mild soapsuds to
clean the surfaces of the device.
►
Disinfect the device as required with a commercially
available disinfectant, e.g. with 70 % isopropyl
alcohol.
►
The device may not be sterilized.
devices and compatible
network as described
device.
device request you to switch
device as module
device.
Operation • 11
English