Logic3 MIP011 Manual Del Usuario página 3

set up of line In
CD
MP3
i-station11 (MIP011) - user Manual
Thank you for purchasing the Logic3 i-Station11. As with all Logic3 products it has been built to the
highest manufacturing standards and tested throughout its development, to ensure you get the best
possible product. Please read through and familiarize yourself with this manual before you use the
i-Station11.
set up of i-station
1. Press the release button to unlock the docking base for the iPod, open it until it locks into position.
2. Insert the appropriate cradle (supplied with your iPod) into the universal dock on the speaker base;
if you are using a line in device a blank cradle is supplied.
3. Choose your source of power :-
Mains Power (3a) - Plug in the DC jack to the rear of the i-Station (DC 5V)
- Select and fit the correct plug adapter to suit your power supply
- Plug the power supply into your mains socket and turn the mains socket On
Battery Power (3b) - Remove the Battery compartment covers
- Insert 4 x AA batteries observing the Polarity Markings
- Replace the Battery compartment covers
WarnInG: Please ensure that the batteries are inserted correctly. If the batteries are in-
serted incorrectly (reversed polarity), this may cause personal injury as well as damage to
your i-station
4. Dock your iPod into the docking base of the speaker.
MD
MiniDisc
3
LInE In