Descargar Imprimir esta página

Helvex UMO8X-INN-01 Guia De Instalacion página 2

Publicidad

Unscrew the connectors and the nut,
2
remove the washer and the separator.
Desenrosque los conectores y la tuerca,
remueva la rondana y el separador.
empaque
separator
washer
separador
rondana
nut
tuerca
connectors
conectores
Hoses Installation
Open the water supply and purge the supply lines.
Abra el suministro de agua y purgue la línea de alimentación.
supply lines
líneas de alimentación
hot water
agua caliente
Open the water supply
hot
caliente
Insert the faucet into the sink and
/
check that the gasket is placed.
Inserte la salida en el lavabo y
verifique que se coloque el empaque.
gasket
/
cold water
agua fría
cold
fría
/
gasket
empaque
Clean the surface.
Limpie la superficie.
M
Screw the hoses (not included) to the connectors and the
supply line.
/ Enrosque las mangueras (no incluidas) a los
conectores y a la línea de alimentación.
connectors
conectores
angle valves
válvulas angulares
To open and close the water flow, move the handle up and
down. To adjust the water temperature, turn clockwise for
hotter and counterclockwise for colder.
el flujo de agua, levante y baje el maneral. Para regular la
temperatura, gire a la izquierda para más caliente y a la
derecha para más fría.
Insert the separator and the washer.
Screw the nut to fix and screw the
connectors.
/ Inserte el separador y la
rondana. Enrosque la tuerca para fijar y
enrosque los conectores.
separator
separador
washer
rondana
nut
tuerca
connectors
conectores
hoses
(not included)
1/2"-14 NPSM x 1/2"-14 NPSM x 24"
mangueras
(no incluidas)
Apply plumber´s tape on the
threaded connections, in order
to prevent leaks.
Coloque cinta teflón en las
conexiones roscadas para
evitar fugas.
/ Para abrir y cerrar
2

Publicidad

loading