4.) Place the Lock Rod (P7), as shown in Illustration #3, against the Left Leg (P2) and align holes. Insert the
Handle (P6) through the outside hole in the Left Leg (P2) and into the hole and the Lock Rod (P7). Align the
screw holes and secure with one Socket Screw (A).
P6
5.) Place the Right Leg (P3) over the embedded threaded holes in the bottom of Table Top (P1). Make sure the
pin on the inside of the Right Leg fits into the slot of the Lock Rod (P7) as it does on the Left Leg (P2).
Secure the Right Leg (P3) to the Table Top (P1) using two Socket Screws (B). Attach the Top Support (P5)
to the Right Leg using one Socket Screw (B1) as shown in Illustration #4. Insert the Handle (P6) through the
Right Leg (P3) and into the Lock Rod and secure with a Socket Screw (A).
A
P2
P7
P1
P3
Illustration #3
B
A
B1
P6
Illustration #4