Publicidad
1. SETTING UP THE BUGGY
Open the fastening bucle (a). Unfold the buggy by pulling the handles upwards (b). Press the lever
as shown in the picture to lock the mechanism preventing the stroller from accidental folding (c).
2. FOLDING THE BUGGY
Remove the Bumper Bar, lift the expanding mechanism shown in the picture (a). Holding the buggy
handles, release the locking device by pressing the pedal (b). Fold the buggy, making sure that the
fabric part is folded properly (c). Fasten the safety buckle (d).
3. FOOTREST ADJUSTMENT
Press the buttons on both sides of the footrest and adjust it to the required position.
4. BRAKE
To brake the buggy, press the brake levers on both sides. To release the brake, lift both levers with
your foot.
5. MOUNTING AND DETACHING THE BUGGY HOOD
To mount the hood, insert its mounting devices into the mounting trakcs (a) and fasten the Velcro
fasteners fixing the hood to the stroller handle (b). To remove the hood, unfasten the Velcro faste-
ners fixing the hood to the buggy handle and then take the mounting devices out of the mounting
trakcs (c).
6. STROLLER BACKREST ADJUSTMENT
20
Publicidad
