Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRONIC SAW
•
By helping you with the protective gloves, pull the chain down and check that
the guide links of the chain are still visible for half the height in the lower part
of the bar.
•
If the guide links are fully visible when pulling the chain down, or if they are not
visible at all, it means that the tension is incorrect.
•
Repeat the adjustment.
•
Position the cover (2) and tighten the two locknuts (1).
Warning!
The chain pinion must not be disassembled by the user, but by at a specialized
service center.
If the chain pinion is damaged, do not use the chainsaw and take it to a specialized
service center.
15.5 LUBRICATION
The chainsaw is equipped with an automatic oil pump that allows to keep the chain
lubricated and cooled.
To fill the oil tank, follow the instructions.
•
Disconnect the battery from the chainsaw.
•
Place the chainsaw in a horizontal position with the oil cap facing upwards.
•
Clean the oil cap, the tank and the surrounding environment with a damp
cloth.
•
Unscrew the oil cap and remove it.
•
Fill the tank to the appropriate level and prevent it from overflowing.
•
Firmly screw the oil cap.
www.kamikazevolpi.com
92
Publicidad
Capítulos
Tabla de contenido
