Descargar Imprimir esta página

Duro-Med 501-2012 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

U S E O F
N E W R O L L AT O R
B E F O R E U S E , P L E A S E R E A D A L L C A U T I O N
A N D W A R N I N G L A B E L S O N T H E R O L L A T O R
W A L K I N G
This unit is to be used as a mobility aid
creating a natural balance. With hands grasped
securely onto handles, the user walks slowly
behind the rollator. Gently, push forward with
weight distributed evenly between handlebars.
B R A K I N G
Normal Brake can be activated by pulling the
brake handle up, similar to operating the
brakes of a bicycle. This function may be
applied while walking with the rollator to slow
down momentum, stopping for a moment, or
WALKING MADE EASY
maneuver around obstacles which may be in
your path.
Parking Brake can be activated by pushing
the handle down into the lock position. This
function should be activated when the user
stops for a period of time. For safety reasons,
SQUEEZE TO STOP
the parking brake should always be engaged
before sitting down onto the seat. Also if
shopping, it will be a good idea to activate the
parking brake while stopped in an aisle, to
avoid rollator from advancing forward. To
release the parking brake, gently pull up.
RELEASE TO ROLL
The braking system is convenient and easy to
operate. People who may have hand
disabilities should find the brake handles wide,
comfortable and non binding. Minimum
pressure will need to be applied to activate the
locking loop brake system.
F O L D I N G
PUSH DOWN TO LOCK
From the user side of the unit grasp the folding
strap located under the hinged seat and lift
into the folded position. The rollator will fold
easily for storage or transport. Pouch can
remain on rollator while being folded.
M A I N T E N A N C E
Always make sure your brakes are operating
correctly before leaving home. Keep the
brake handles free from dirt, dust and grime.
Build-up of particles could cause your brakes
not to engage properly. If the brakes are not
functioning, check the cables for looseness.
The cables can be tightened at the adjuster
screw located where the cable is connected
to the brake handle. If the cable is broken, it
will need to be replaced. Periodically check
LIFT SEAT AND PULL
STRAP TO ENGAGE
and tighten all nuts, bolts, screws, and other
FOLDING MECHANISM
hardware located on rollator.
w w w . d u r o m e d . c o m

Publicidad

loading

Este manual también es adecuado para:

541010