Nyne Home Audio NH-3000 Guía Rápida Para El Usuario

NH-3000
EN ES
Home Audio Series Serie de audio para el hogar
Quick User Guide
EN
Guía rápida para el usuario
ES
Guide d'utilisation rapide
FR
nyne.com
Notes
NYNE NH-3000_Quick User Guide_V1.1_20120405.indd 1
Unpack
Unpack and identify the items of your package.
1
1 x docking speaker
2
1 x remote control
3
1 x power adapter
FR
Série Home Audio
Prepare
1
Connect power.
Play music from your iPod/iPhone/iPad
1
In power-on mode, press
remote control repeatedly to select the dock source.
The display panel shows "iPod" briefly, and then returns to clock display.
+
2
Start music play on your docked iPod/iPhone/iPad.
3
Press / to adjust volume.
The display panel shows the volume level during volume adjustment.
+
4
Press or to skip to the previous or next song.
5
Press to pause or resume music play.
Play video from your iPod/iPhone/iPad
1
Connect a composite video cable (not supplied) to:
• the socket (yellow) on the back of the device;
• the composite video input socket (yellow) on a TV.
2
In power-on mode, press
remote control repeatedly to select the dock source.
The display panel shows "iPod" briefly, and then returns to clock display.
+
3
Start video play on your iPod/iPhone/iPad.
The video is played on the TV with sound output from the docking speaker.
+
4
Press / to adjust volume.
The display panel shows the volume level during volume adjustment.
+
5
Press to pause or resume video play.
Store your favorite radio stations
You can store up to ten favorite FM radio stations.
1
In FM tuner mode, tune to a radio frequency.
2
Press and hold .
The display panel shows "P -", followed by a flashing preset number.
+
3
Press or to select a preset number for the radio station.
4
Press to confirm and store the preset radio station.
5
Repeat the steps to store nine more radio stations.
To select a preset radio station:
• In FM tuner mode, press
+ The display panel shows the selected preset number and the
corresponding radio frequency briefly, and then returns to clock display.
The device tunes to the corresponding radio station.
+
Tip:
•
After the device stays at a preset radio frequency for several seconds, the
display panel returns to normal clock display. To display the current preset
number and radio frequency again, press
Listen from an auxiliary device
1
Connect an auxiliary device to the
docking speaker.
2
In power-on mode, press
top of the device or
remote control repeatedly to select the
AUX source.
The display panel shows "AU" briefly, and
+
then returns to clock display.
3
Start music play on the auxiliary device.
4
1 x 3.5mm audio cable
5 1 x User Manual
1 x Quick User Guide
1 x warranty card
EN 1
on the top of the device or on the
on the top of the device or on the
EN 3
repeatedly to select a preset number.
once.
on the
on the
EN 5
2
Press to turn on the device.
3
Set clock.
(1) In power-on mode, press and hold .
The hour digits start to flash.
+
(2) Press / to adjust the hour, and then press
+ The minute digits start to flash.
(3) Press / to adjust the minute, and then press
the clock setting.
Tip:
• The device only supports the 12-hour clock system.
Play and charge your iPod/iPhone/iPad through
the device
Dock your iPod/iPhone/iPad
You can dock and charge your iPod/iPhone/iPad as long as the device is
connected to AC power.
• Connect your iPod/iPhone/iPad to the dock connector.
The device starts to charge your iPod/iPhone/iPad.
+
EN 2
To switch to video play on your iPod/iPhone/iPad:
• Press and hold .
To switch back to video play on the TV:
• Press and hold again.
Listen to FM radio stations
Notes:
•
For optimal FM reception, fully extend the fixed FM antenna at the back of
the device.
•
To reduce interference, keep the antennas away from any radiation
resources, such as the TV, or micro oven.
Tune to a radio station
1
In power-on mode, press on the top of the device or
the remote control repeatedly to select the FM tuner source.
The display panel shows "FR" briefly, and then returns to clock display.
+
The device tunes to the last tuned radio station automatically.
+
2
Press and hold or until the frequency indication starts to
change, then release the button.
The device tunes to a radio station with strong signal reception
+
automatically.
Tips:
•
To tune to a weak radio station, you can also press or
to adjust the frequency step by step.
• After the device stays at a radio frequency for several seconds, the display
panel returns to normal clock display. To display the current radio frequency
again, press or once.
EN 4
Desembalar
Desembalaje e identificación de los elementos dentro de su embalaje.
1 4
1 altavoz base 1 cable de audio de 3,5 mm
5 1 manual del usuario
2 1 mando a distancia
1 guía rápida del usuario
3 1 adaptador de
1 tarjeta de garantía
alimentación
Preparación
1
Conecte a la fuente de alimentación.
ES 1
to confirm.
to confirm
on
repeatedly
4/6/2012 11:02:28 PM