Krüger & Matz KM0240FHD-S5 Manual Del Usuario página 9

A
B
Warning:
Be sure to follow the instructions for installation, if the base is not installed correctly,
it may result in the TV falling over. To remove the stand, perform the steps in reverse
order, the base can not adjust the angle. During the installation process, be careful
to avoid damage to the TV and your hand caught and ground to the bottom of the
TV.
Mounting on a wall
IMPORTANT This operation requires two people!
To ensure a safe installation, comply with the following safety instructions:
• Disconnect from power supply before mounting.
• Check that the wall can support the weight of the TV set and wall mount assembly.
• Follow the mounting instructions provided with the wall mount.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the material of the wall.
• Make sure that the TV set cables are placed in such a way that there is no danger
of tripping over them.
• Mounting the TV set on the wall should be performed only by professionals.
16
Owner's manual
Step 1
Locate the 2 of bottom bracket
into the gap in the bottom of
the TV, and check that it is
securely held in place as in
illustration A) below.
Step 2
Lock the 2 screws in the
designated location as in
illustration B) below. Check
each screw is firmly tightened.
Owner's manual
BUTTON ON THE TV SET
Note: The location, names and availability of the buttons may vary according
to the TV model. Please refer to the actual product.
• Press the button to turn on the TV.
• When the TV is on, press it to bring up the Menu.
• While in the Menu, press the button to select the option. Press and hold the
button to confirm the option.
SOCKETS
Note: The location, names and availability of the sockets may vary according
to the TV model.
Socket Function
RF input: Connect with ground-based or satellite
1x analogue DVB-T/T2/C television with an antenna cable. Connect
1x DVB-S/S2 plug of an antenna cable to the ANTENNA
INPUT. Connect the plug of a satellite antenna
cable to the SATELLITE input.
LINE OUT output Connect compatible audio receiver to the TV
set.
CI+ slot Technology that allows you to insert a CI
module that allows your TV set to receive
scrambled TV channels.
HDMI input Transmits video and audio data from external
device such as DVD or Blu-Ray player, video
game console or PC (with compatible video
card) to your TV set with a HDMI cable.
USB input Connect USB storage device.
17